Attenuation network ~ calculator

   One can attenuate the entire tweeter response curve using two resistors placed between the crossover network and the tweeter.  This network will have the same impedance as the tweeter so the crossover will react the same.

Enter desired attenuation
in negative decibels:
  db
Enter impedance ( R t ) of tweeter :   ohms
 
Rs=
ohms
Rp=
ohms
Attenuation network

Instructions

Driver
Parameters

Sealed
Enclosures

Vented
Enclosures

2 way
Crossover

3 way
Crossover

Conversion
Calculators